Nikon D7100 Canon EOS Rebel T5i Nikon D3300 Canon EOS 1200D Sony A5000 Nikon D4S
Nikon D7100 Canon EOS Rebel T5i Nikon D3300 Canon EOS 1200D Sony A5000 Nikon D4S
  News Headlines Apple Canon Casio Fujifilm HTC LG Nikon Nokia Olympus Panasonic Pentax Ricoh Rollei Samsung Sony  
Lets Go Digital
 
     
Powered by True
Counted by OneStat.com
Fujitsu macros for ASIC
Ilse Jurriƫn : September 6th 2006 - 23:07 CET
Digital Camera Review Test Appareil Photo Numerique Prueba camara digital Digitale Camera Test Dijital Kamera Incelemeleri Digitalkamera Test Digitalkamera
FujitsuFujitsu macros for ASIC : Fujitsu Microelectronics America, Inc. (FMA) today expanded its portfolio of IP cores for networking, communications and storage system applications, introducing three new macros for custom ASIC designs. The new macros include Fujitsu's Serial ATA physical layer storage interface, a 10 Gigabit/second clock data recovery transceiver, and a SerDes macro that is compliant with PCI Express version 1.0a. All three macros can be used in designs built using Fujitsu's 0.11-micron process technology. The PCI Express SerDes and Serial ATA macros have also been designed to be used in 90-nanometer designs. All macros can be applied in customer-owned tooling (COT) and ASIC designs.
Fujitsu macros for ASICFujitsu serial ATA macro
"These new macros illustrate Fujitsu's commitment to provide total solutions for our ASIC and COT customers," said Jason So, senior director of FMA's Custom LSI Business Group. "The 10G macro provides customers with the opportunity to enter this challenging design environment using a proven, low-risk, highly efficient core for high-end networking designs. The Serial ATA macro lets users design for the storage and server applications using proven technology, while the PCI Express core delivers the very high bandwidth, excellent quality of service, and reduced power requirements that are essential for new server, desktop and other computing models today."

Fujitsu Serial ATA macro - PHY blocks
The new Serial ATA macro consists of a PHY-control block, PHY core block, and PHY I/O block. The PHY control block interfaces to a link layer equipped with a 16-/20-bit or 32-/40-bit interface. The macro provides cost-efficient STA storage solutions, with advanced data-protection capabilities and support for hard disk drives, network attached storage, servers and other applications. The macro complies with ATA specification revision 2.5 and features two-channel PHY, far- and near-end loopback support, and spread spectrum clock generation, plus AC coupling support. The core block include DCR, PLL generation, 8B/10B encoding and decoding, at-speed built-in self-test, OOB processor and speed negotiation, and integrated 100-ohm matched differential termination.

Fujitsu 10Gbps CDR Transceiver
The new 10G macro includes a differential PCML transmitter, reference clock input for PLL, with an LVDS interface, OC-192 jitter tolerance mask, and synchronous data-transfer capability using CDR. Individual channels can be powered down to optimize power usage. The macro includes an on-chip 50-ohm termination for both transmitter and receiver, along with integrated pseudo-random binary sequence generator (PRBS) for test, and software- programmable output current.

Fujitsu PCI Express SerDes Macro
The PCI Express macro, which supports data rates from 2.5Gbps to 3.25Gbps, is ideal for desktop, wireless, server, storage and other applications that require higher bandwidth and lower power consumption than predecessor designs using the PCI standard. This macro incorporates four-channel parallel transmitter and receiver arrays with asynchronous data transfer using dedicated CDR in each receiver channel, and integrates a 50-ohm termination resistor in the receiver and transmitter. Two power-down operations - dedicated channel and array - also are supported. The macro operates on 1.2V and 3.3V power supplies; the reference clock frequency is 156MHz to 160MHz.

About Fujitsu Microelectronics America
Fujitsu Microelectronics America, Inc. (FMA) leads the industry in innovation. FMA provides high-quality, reliable semiconductor products and services for the networking, communications, automotive, security and other markets throughout North and South America.

   Camera Chip from Fujitsu
   Fujitsu LifeBook Q2010 Notebook
   Fujitsu FI-5900C production scanner
   Next  Gary Oldman film shot with Nokia N93
   Previous  Biomorphic CMOS sensors feature APD technology
   News by brand:Fujitsu
   News by category:Computer
   News by brand and category:Fujitsu Computer
   Canon EOS 700D - $749.00
   Nikon D7100 - $929.00
   Nikon D5300 - $846.95
   Sony Alpha 6000 - $798.00
   Canon EOS 70D - $1099.00
   Samsung NX300 - $499.00
   Canon PowerShot G1 X Mark II - $799.00
   Panasonic Lumix DMC LX7 - $321.99
   Sony CyberShot DSC RX100 III - $798.00
   Nikon D3300 - $596.95


LetsGoDigital digital camera magazine
Latest Fujitsu announcements
Fujitsu ScanSnap S1100
Fujitsu ScanSnap S500 scanner
Fujitsu macros for ASIC
Fujitsu mobile hard disk drive
HDMI CMOS Camera Chip from Fujitsu
Fujitsu LifeBook Q2010 Notebook
Fujitsu FI-5900C production scanner
InterVideo Software Bundled with Fujitsu computers
Fujitsu film bendable color electronic paper
Fujitsu wireless USB to camera introduction
Fujitsu ScanSnap FI-5110 EOX2 scanner introduction
 
Twitter LetsGoDigital
Latest news headlines
Sony A5100 system camera
Samsung extends Olympic Games partnership
Sony A5100 Accessories
Sony A5100
HTC ONE (M8) MirrorLink software upgrade
Lenovo ThinkStation desktop workstation
New distributor for Samsung Mobile accessories
Samsung Smart TVs with adaptive video acceleration
Photokina mobile photorgraphy news
Samsung Galaxy Alpha
Photokina 2014 Trade solutions
Photokina 2014 action zone
Nokia 130
Pentax Q-S1
Canon PowerShot digital cameras
   
CanonCasioFujifilmNikonOlympusHTCSamsungSonyPanasonicNokia
  Accessories Android Apps Camcorders Digital cameras Mobile phones Smartphones Software Tablets   CES CeBIT Gadgets IFA Photokina PMA